Due to the long distance and complex procedures of international logistics transportation, the packaging of goods is very important. The basic guarantee is that the goods will not be damaged, lost, leaked, damaged or contaminated with aircraft equipment or other items during transportation. Therefore, it is necessary to select appropriate internal and external packaging materials and methods based on the nature and quantity of the goods, the environmental conditions of transportation, and the requirements of the carrier, and carry out appropriate packaging to avoid damage to the goods. Next, Bian Xiao will provide you with a detailed explanation of Air Company's requirements for international air express packaging? I hope it has reference value for everyone.

What are the dimensions and weight requirements for international air cargo? The weight of the goods is calculated based on gross weight, and the unit of measurement is kilograms. Rounding off the mantissa with a weight less than 1kg. When the weight of each air waybill is less than 1kg, it shall be calculated as 1kg. Valuable items are calculated based on their actual gross weight, with a unit of calculation of 0.1kg.

The weight of cargo carried by non wide body aircraft generally does not exceed 80 kilograms and the volume does not exceed 40 × sixty × 100 centimeters. The weight of each cargo carried by a wide body aircraft generally does not exceed 250kg, and the volume generally does not exceed 100 ×  one hundred ×  140cm. For goods exceeding the above weight and volume, the carrier can determine the maximum weight and volume that can be received based on the aircraft type and loading and unloading equipment conditions at the origin and destination airports.

Pack or tie straw ropes with straw bags. In addition to general cargo transportation rules, the transportation requirements for special air parcels should meet the following corresponding special requirements: with the consent of the carrier, the postman should be able to handle emergency cargo transportation and receive emergency cargo according to regulations.

Without special permission from the Civil Aviation Administration, it is prohibited to carry microbial products that are harmful to humans, animals and plants, such as bacteria, carrier culture media, and other microbial products. Vaccines, vaccines, antibiotics, serum, and other biological products manufactured, refined, and disinfected by humans can be transported as ordinary goods if the sender provides a sterile and non-toxic certificate.

The total length, width, and height of each piece of goods shall not be less than 40 centimeters. If the volume of each kilogram of goods exceeds 6000 cubic centimeters, it is considered light foam goods. Light foam goods are weighed at 1 kilogram per 6000 cubic centimeters.

Size requirements: 100 pieces/piece with a length of 1200cm-200cm on one side and a length of 75cm on the second side, 100 yuan/box (no price on the other side), 140 pieces/piece with a weight of 22.5kg-40kg (no price above 40kg). One length+two widths+two heights greater than 320cm cannot be connected without a price. A low sea freight of 10 pounds per empty container.

According to relevant national regulations, animals must also hold an immunization certificate issued by the local plant quarantine institution at or above the county level; For animals under national protection, a partial transportation certificate must also be provided; Mailing to market scale animals also requires proof of market operation. When transporting animals, the sender should contact the carrier in advance and arrange the location.

Packaging requirements: The goods are not exposed, sturdy, and comply with international transportation standards. It is best to export wooden boxes (such as plywood, mixed board, etc.). It is best not to use wooden boxes made of raw wood. Many countries have restrictions on original wooden boxes Oversized items, overweight (gross weight greater than or equal to 60kg), generally require support. To facilitate the use of forklifts. The contact surface of the tray should be flat.

It is best to ensure the accuracy of the quantity of goods before they arrive at the airport! This is related to the speed of warehousing and the workload of the airport. Generally, the number of pieces provided by the shipper is not accurate, and the operator can confirm the exact number of pieces of the goods again after delivery or as soon as possible. The accuracy of the number of packages affects the validity of the air freight label written.